Pattern mode, Selecting a pattern, Setting the playback tempo – KORG EA-1mkII User Manual

Page 22: Using the dial to change the tempo, Using the tap tempo key to change the tempo, Playing a pattern (pattern play), The timing at which patterns will change, About the tempo when the pattern is changed, Selecting a pattern setting the playback tempo, Pattern a01...d64

Advertising

4.Pattern mode

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

4. Pattern mode

In this mode you can play patterns, or edit them to make new
patterns.
Press the Pattern mode key to enter Pattern mode.

Synthesizer 1

(Synth Parameter, Effects,

Motion Sequence)

Synthesizer 2

(Synth Parameter, Effects,

Motion Sequence)

Step

Pattern (A01)

Step

Phrase patterns (maximum 64 steps)

Parts

256 patterns A01...D64

Selecting a pattern

PATTERN

A01...d64

Use the cursor keys to make the parameter select LEDs indicate
PATTERN

Rotate the dial to select one of the 256 patterns: A01...A64,
b01...b64

, C01...C64, and d01...d64. By holding down the SHIFT

key as you rotate the dial, you can change the pattern number
in steps of ten.

Setting the playback tempo

TEMPO

20...300

• Using the dial to change the tempo

Use the cursor keys to make the parameter select LEDs indicate
TEMPO

. Rotate the dial to modify the tempo.

• Using the Tap Tempo key to

change the tempo

While the pattern is playing, press the TAP key three times or
more at the desired tempo. The EA-1

will calculate the in-

terval at which you pressed the TAP key, and will change the
tempo accordingly. You can change the tempo in the same way
even when playback is stopped.
When you use the cursor keys to make the parameter select
LEDs indicate TEMPO, and the tempo you modified will ap-
pear in the display.

If you switch to a different pattern without writing the pat-
tern whose tempo you modified, the pattern tempo will
return to the previous value. If you wish to keep the modi-
fied tempo, you must perform the Write operation (refer to
p.33 "Saving a pattern").

Playing a pattern

(Pattern Play)

Use the cursor keys to make the parameter select LEDs indicate
PATTERN

. Press the Play/Pause key to start pattern playback.

When the pattern finishes playing, it will return to the begin-
ning and continue playing.
While listening to a pattern, you can strike the step keys along
with the phrase, or move the knobs to modify the sound.
By taking advantage of the various functions of Pattern mode
as part of your performance technique, you can enjoy even wider
possibilities.

The timing at which patterns will

change

When you switch patterns during playback, the change will
occur when the currently playing pattern finishes its last step.
Until the pattern actually changes, the pattern number selected
in the display will blink.

Pattern A01

Pattern is changed Begins playing

Pattern A21

Playing from the beginning of a

pattern (Reset & Play)

If you hold down the SHIFT key when pressing the Play/Pause
key, the playback will be forced to playback from the begin-
ning. By using this function in conjunction with setting the
tempo by the TAP key, you can synchronize the playback with-
out using MIDI.

In order to ensure that the phrase always matches, you
will need to perform this adjustment each time.

Pattern A01

About the tempo when the pattern

is changed

When you switch patterns during playback, the tempo of the
previous pattern will always be maintained. If you wish to use
the tempo that is stored in the newly selected pattern, press the
Stop/Cancel key to stop playback, and then start playback once
again. The pattern’s own tempo will be applied from the point
at which the pattern was stopped.

Advertising

This manual is related to the following products:

AmkII

Popular Brands

Popular manuals