Konica Minolta S304 - Manual (Page 44)

The date of recording can be printed directly on the image. The
imprinting function must be activated before the image is taken. Once
activated, the date will continue to be imprinted until the function is
reset; a yellow bar is displayed behind the frame counter on the monitor
to indicate the imprinting function is active.
Date imprinting is activated with a menu; see “navigating the auto-
recording mode menu” section on page 38. In multi-function recording
mode, date imprinting is controlled in the Custom 2
section of the multi-function recording menu (p.
50).
The date is imprinted in the lower right corner of
the image when viewed horizontally. It is printed
directly on the photograph writing over the image
information. The date can be imprinted in three
formats: year/month/day, month/day/year, and
day/month/year. The date and date format are set
in the Custom 2 section of the setup-mode menu
(p. 84).
44
AUTO-RECORDING MODE
DATE IMPRINTING
Every time a still image is recorded, it is stored with an exif tag that contains the date and time
of recording as well as shooting information. This information can be viewed with the camera in
the playback or quick-view mode, or on a computer with the DiMAGE Image Viewer Utility soft-
ware.
Camera Notes
Date-imprinting indicator