Kodak P725 - Manual (Page 21)

www.kodak.com/go/digitalframesupport 21
3
Solving frame problems
For step-by-step product support, visit www.kodak.com/go/digitalframesupport and
select Interactive Troubleshooting & Repairs.
If... Try one or more of the following
Frame does not
turn on. ■ Make sure the power cable that was included with your frame is
connected securely (see
page 3 ).
■ Unplug the power cable from the frame. Wait 5 seconds, then
reconnect the cable.
■ Press and hold the power button for 1 second.
Nothing happens when
a memory card, camera,
or USB device is
connected.
NOTE: A large picture file or
images on a large capacity
card may take longer to
appear.
■ Insert a certified SD/MMC/MS/xD card with images into the
designated card slot, then push to seat it (see
page 7 ). In the top
card slot, make sure the card is seated flush with the case.
■ Make sure the USB cable that was included with your camera or USB
device is connected securely (see
page 8 ).
■ Make sure the file format of your pictures is supported. See the
extended user guide at
www.kodak.com/go/digitalframesupport .
Touch border doesn’t
work. ■ Use your finger to make your selections on the Quick Touch Borders
(see
page 5 ).
■ Unplug the power cable from the frame. Wait 5 seconds, then
reconnect the cable. Press and hold the power button for 1 second.
Frame freezes up. ■ Unplug the power cable from the frame. Wait 5 seconds, then
reconnect the cable. Press and hold the power button for 1 second.
■ Use a paper clip or other slim object to press the recessed reset
button on the back of the frame (see
page 20 ).