Kodak EasyShare 350 - Manual (Page 21)

www.kodak.com/go/support 15
5
Printing from a computer
Connecting to a computer
IMPORTANT: Make sure your camera or other device is NOT connected when you
connect the photo printer to the computer.
1 Make sure Kodak EasyShare software is installed on
the computer (see Installing the software, page 12 ).
2 Turn the photo printer off.
3 Plug the labeled end of the USB cable (included)
into the labeled USB port on your computer. See
your computer documentation for details.
4 Plug the other end of the USB cable into the USB
connector on the back of the photo printer.
5 Turn on the photo printer.
NOTE: On Windows operating systems, a new hardware wizard runs
when the printer is connected for the first time. See your
computer documentation for details.