Kobe Range Hoods CH7742SQ - Manual (Page 5)

4
- PREPARING THE INSTALLATION LOCATION -
----SAFETY WARNING----
INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES, PLEASE
WEAR PROTECTIVE GLOVES IF YOU HAVE TO OPEN THE
HOOD FOR CLEANING OR SERVICING.
NOTE: TO AVOID DAMAGE TO YOUR HOOD,
PREVENT DEBRIS FROM ENTERING THE
VENT OPENING.
Make sure the surface of the wall is clean and free of debris.
Providing Electrical Power Line Access (SHOULD BE DONE BY A LICENSED
PROFESSIONAL)
1. If there is no electrical power line access opening, you will need to make an opening first
before you can proceed further. To make an electrical power access opening, mark an outline
for the opening on the cabinet bottom. Use a 1¼” wood bit to form the access opening.
{Fig. 1} CAUTION: Be careful when operating the electric drill.
(Electrical power access)
{Fig. 1}
----SAFETY WARNING----
IF DRILLING INTO THE WALLS, BE CAREFUL NOT TO CUT
EXISTING ELECTRICAL CABLES, WHICH WOULD CREATE A
HAZARD. ALL ELECTRICAL CONNECTIONS MUST BE IN
ACCORDANCE WITH LOCAL CODES, ORDINANCES, OR
NATIONAL ELECTRICAL CODE. IF YOU ARE UNFAMILIAR
WITH METHODS OF INSTALLING ELECTRICAL WIRING,
SECURE THE SERVICES OF A QUALIFIED ELECTRICIAN.
CAUTION: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT USE
WITH ANY SOLID-STATE SPEED CONTROL DEVICE.