Kenwood K-501USB - Manual (Page 12)

12
English
Controls, Connectors and Indicators
1
2
3
4
5
6
7
8
11
13
14
15
16
9
10
12
18
19
17
20
The display design mentioned in the following
text may differ from the actual design
Demonstration function
This system incorporates a demonstration function (display only). In the
demonstration mode, the lighting operation indicators vary in sequence
but this variation is accompanied with no change in played audio.
Press during
demonstration.
To cancel (switching demonstration off)
Press and hold for more than 2 seconds
while the system power is ON.
To start (switching demonstration on)
* The demonstration is switched on automatically when a
power failure occurs or the power cord is unplugged or
plugged in again while the system power is ON.
Display
Character information display
Available operation key indicators
The indicators light to indicate the MULTI CONTROL keys that
can currently be pressed for editing or selection operation.
Timer indicator (Refer to page 46 of the “Operating Procedures”.)
The indicator lights up when the timer is activated.
D.AUDIO indicator
The indicator lights when a Kenwood digital audio
player is connected through the dedicated cable.
Sound setup indicator (Refer to page 18
of the “Operating Procedures”.)
The indicator lights when the sound setup is enabled.
Music file type indicators
An indicator lights up according to the type
(compression format) of the music file being played.
Source operation indicators
The indicators for the connected (inserted) audio
input source or recording condition light or blink.
REC REMAIN indicator (Refer to page 54
of the “Operating Procedures”.)
The indicator lights when the remaining
recording time is being displayed.
Tuner and time-related indicators (Refer to
pages 20 and 54 of the “Operating Procedures”.)
O.T.E. (One-Touch Edit) recording indicator (Refer
to pages 26 to 29 of the “Operating Procedures”.)
The indicator lights during O.T.E. recording.
Mode-related indicators (Refer to pages
6 to 15 of the “Operating Procedures”.)
One of the indicators light according to the selected mode.
: Repeat play mode
A.P.S. (Auto Power Save) indicator (Refer
to page 68 of the “Operating Procedures”.)
: Random play mode
: Folder mode
: Program mode
Recording progress indicator
The indicator segments show the progress of recording.
Record mode-related indicators (Refer to
page 56 of the “Operating Procedures”.)
The indicators light to indicate the modes of
recording in the USB audio player and memory card.
MUTE indicator (See page 24.)
The indicator lights during audio muting.
Play/record/pause indicators
Record setup indicators (Refer to page 57 of
the “Operating Procedures”.)
The indicators light according to the recording speed and input settings.
Selection cursors
Either cursor lights to indicate the character
information being selected.
: Lights in SETUP or TOOL operation.
: Lights when a folder in a USB audio player or
memory card is selected.
: Lights when a music file in a USB audio player or
memory card is selected
RDS-related indicators (See page 24, 25.)
3
5
6
7
8 9 10 11 12 13 14
15
16
17
18
19
20
4
1 2
SETUP/DEMO
SETUP/DEMO