Kyocera E4000 - Manual (Page 14)

Startup 14
microSD card
The microSD card gives your phone a
very large memory capacity. This allows
you to save multimedia data, including
images, photos, MP3 audio files, ring
tones, and Java games. You can also use
this memory card to store any other
files.
Inserting the microSD card
Insert the microSD card into the card
holder. Ensure that the card's metal
contacts face down.
Removing the microSD card
Press the microSD card to release it.
Switching the phone on/off
Switching the phone on
After you have installed the battery and
finished charging it, you are ready to
switch on the phone. Press and hold
to switch the phone on.
You may be required to enter the PIN
code.
The first time you switch on the phone,
you will be guided through a series of
setup screens. See "First time startup" on
page 15.
Entering the PIN
Enter your PIN using number keys and
confirm with
.
The PIN (Personal Identification
Number) is the password provided by
your network operator. You need this
password in order to use the SIM card.
When the PIN code entered has been
accepted, the phone will automatically
Charging error may refer to
over-current protection for the
charger or over-voltage
protection for the battery. Try to
replace the charger or the
battery.
• Your phone can support a microSD
card with capacity up to 2GB.
• Your phone supports a microSD card
using FAT32 file system only.
• You are strongly recommended to
transfer and store newly added
programs on your external memory.
Newly added programs cannot be
activated if the program files are stored
on the removed microSD card, however
you can still see the program access in the
menu of your smartphone.
It may take a while to power on the phone
for the first time before it enters the setup
screen.