Kawai CA1000 - Manual (Page 58)

54 KAWAI DIGITAL PIANO CA1200, CA1000
Reference Section
R
EVERB
(REVERB B
UTTON
)
Use the REVERB button to add reverberation to the sound. There are
five types of reverb built-in: ROOM, STAGE, HALL, 3D ROOM, and 3D
HALL.
To add reverb to the sound, press the REVERB button. The LED
indicator will be turned on to indicate that the reverb is in use. Press
and hold the REVERB button and the currently selected reverb type
will be shown in the LCD display. To change the reverb type, use
the VALUE buttons.
The LCD Display shows the currently selected type
of reverb.
To turn off the reverb press the REVERB button again.
◆ NOTE The effect and reverb settings are stored with the sound. When you select
the same preset sound again your chosen effect will be recalled, until the
instrument is turned off. Once the power is turned off, the effect will be
reset to the factory setting unless you use the “User Memory” function to
save your current reverb and effect settings.
For more information about the “User Memory” function please see page
50 in this section of the manual.
Reverb Type
= Room