Klipsch Palladium P-37F - Manual

As the “smallest” floorstanding loudspeaker
in our high-end luxury Palladium™ Series, the
P-37F features the flagship P-39F’s technology
and gallery-like appearance in a slightly more
compact, but equally stunning package.
The P-37F’s carbon-infused, thermoset
composite dual-horn configuration is unique
to the Palladium family. It consists of a propri-
etary tweeter design, combining a chambered
phase plug and Tractrix
® Horn for extended
high-frequency response; a second 90º by 60º
acoustically damped Tractrix Horn is coupled
to the midrange driver, resulting in precise
performances.
The three low-frequency drivers employ 7"
hybrid cone woofers, powered by a unique
three-part neodymium magnet structure with
dual stabilizing rings. Three ports on the rear
of the speaker enhance low-distortion bass
response. Each woofer’s voice coil responds
accurately to the smallest signal modulation,
yet can also handle the high power of the most
demanding soundtracks.
Designed with an eye toward home interior
and furniture designs, the P-37F has a signa-
ture style that blends classic Klipsch audio
and a clean, contemporary look. Its unique
enclosure hints at the power inside, while
maintaining a high degree of beauty. Next to
its shape, the most striking visual statement is
the zebra-grain Linia veneer available in natu-
ral, merlot or espresso. The horizontal linear
grain and absence of visible fasteners further
add to its appeal.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
Floorstanding Loudspeaker
• Elegantly balances performance and lifestyle
• Remarkably precise and detailed reproduction of sound
• Excellent, low-distortion bass response
• Gallery-like appearance fits beautifully into any décor
P-37F
frequency response 43Hz-24kHz +/-3dB
low frequency extension 31Hz
high frequency extension 30kHz
power handling 275W continuous / 1100W peak
recommended amplifier power 50 - 600W
sensitivity 96dB @ 2.83V / 1m
nominal impedance 4 ohms
mid-frequency crossover 550Hz
high frequency crossover 3400Hz
maximum acoustic output 120dB (2 speakers in-room)
high frequency driver 0.75" (1.9cm) titanium diaphragm
compression driver mated to
90° x 60° Tractrix ® Horn
mid-frequency driver 4.5" (11.4cm) aluminum diaphragm
compression driver mated to
90° x 60° Tractrix ® Horn
low frequency drivers Three 7" (17.8cm) high-output,
aluminum / Rohacell ® / Kevlar ®
hybrid cone woofers
enclosure material Constrained layer MDF
(medium density fiberboard)
enclosure type Bass-reflex via triple rear-firing ports
height 46.5" (118.1cm)
width 9.75" (24.8cm)
(12" / 30.5cm at the base)
depth 19.5" (49.5cm)
weight 98 lbs (44.5kg)
finishes Zebra-grain Linia veneer in natural,
merlot or espresso stain
S p e c i f i c a t i o n S