Timers (menu 2), Timers (menu 2) 22 – Kyocera QCP 2700 User Manual
Page 30
[22]
louder with each ring.
Mute/Unmute (Menu 12):
Switch the microphone on and off during a call. When the
microphone is off, the other party can’t hear you.
Keybeep Volume (Menu 13):
Adjust the volume that the keys make when you press them.
Earpiece Volume (Menu 14):
Adjust the earpiece (speaker) volume. Turning the dial-shuttle
during a call will adjust this setting as well.
Ringer Type (Menu 15):
Choose from ten possible ringer sounds.
NOTE: Calls will automatically generate a distinctive ringing sound when you are outside
your regular service area, as noted on page 8.
Key Sound (Menu 16):
Select either beep tones or click sounds.
Beep Length (Menu 17):
Set key beep tone length (how long the beeps will be played over the
air from a single key press). The “long” setting may be necessary for older answering
machines or automated systems that require long key press tones.
Message Beep (Menu 18):
The beep signaling an incoming message can be deactivated if
desired, or an additional reminder beep can be added.
Timers (Menu 2)
These features include items that keep track of your air time and make the most of your battery
life.
All Calls (Menu 21):
Displays length of all calls during the lifetime of the handset in minutes
and seconds and the number of calls made. This information is not resettable.
Recent Calls (Menu 22):
Displays length of all calls in minutes and seconds and number of
calls. This information is resettable.
Minute Alert (Menu 23):
Produces an audible alert 10 seconds before the end of each minute
during a call.
Auto-Off (Menu 24):
Enables you to set the phone to turn off automatically after a specified
time. Time remaining before shutoff is shown on the display. Pressing any key will restart
the countdown. When the phone is turned off, the auto-off feature is disabled until
activated again.
Bill Timer (Menu 25):
If enabled by your service provider, this feature provides additional
timer information according to their billing methods. It is usually used only on phones
that are being rented.