Kyocera QCP 2700 - Manual (Page 22)

[14]
Erasing a stored memory
There are two ways to erase a memory.
From a phone book entry display (meaning you’re already looking at the entry you would like to
remove):
1. Select “Options.”
2. Scroll and select “Erase.”
3. Confirm that you want to erase by selecting “Erase.”
Or from the standby display:
1. Select “Features.”
2. Select “Directory.”
3. Scroll and select “Erase.”
4. Select an entry and confirm that you want to erase it.
Editing a stored memory location
1. Select “Features.”
2. Select “Directory.”
3. Scroll and select “Edit.”
4. Scroll to find entry or enter its location number.
5. Select to “Edit” the entry.
6. Choose to edit name, phone number, or location number.
7. Edit the name using or (or by turning the dial-shuttle) to move the cursor
through the name. Use the digit keys to replace letters or add new letters, and
use to delete letters. (See page 16 for punctuation and lower case characters.)
Edit the phone number or storage location by turning the dial-shuttle to move the
cursor to the digit(s) to be edited. Once the cursor is in position, change the number
by using the digit keys to insert or replace digits, and to delete digits.
8. If necessary, select “Options.”
9. Select “Save.”
CHANGING YOUR PHONE BOOK