Kenwood DM-SG7 - Manual (Page 43)

DM-SG7(EN)
43
Editing
The TRACK DIVIDE function can be used to turn the part you want to erase into a track, and that track can
be erased with the TRACK ERASE function.
Be careful in using this operation because a track cannot be recovered once it has been erased.
Turn the part to be erased into one track.
1
Erasing a part of a track
Use the TRACK DIVIDE function and edit
the track so that only the part you want
to erase becomes a track.
TRACK DIVIDE fl
The part divided with TRACK DIVIDE becomes
one “track”.
The space left after erasing is filled by
subsequent tracks which move along.
A B C
1 2 5 3 4
A B C
1 2 4 3
Track No. is
adjusted.
Execute TRACK
ERASE once.
Part to be erased
A B C
1 2 5
A B
1 2 3
C
3 4
Should be approx. 2
sec. or longer.
Part to be erased
Execute TRACK
DIVIDE twice.
Should be approx.
2 sec. or longer.
TRACK ERASE w
Eject the Mini Disc. (Main unit only)
While “WRITING” is displayed, do not im-
pact or move the unit because information
about recording and editing is being writ-
ten to the Mini Disc.
N O D I S C WRITING EJECT
Information is
being written. Mini Disc has been
ejected.
3
fl
Erase the part to be erased.
2
Use the TRACK ERASE function to erase
the “track” (part you want to erase) that
you made in step
1.
w
Note Note
0