Kodak PROFESSIONAL LED II 20P - Manual (Page 13)

September 2000 xiii
About This Guide
This is a User’s Guide for the KODAK PROFESSIONAL LED II Printer 20P and
the KODAK PROFESSIONAL LED II Processor. It provides step-by-step
instructions for the operations you perform while using the Printer and Processor
as a system. It also includes procedures and information for operating,
maintaining, troubleshooting, and calibrating the system.
Also included in this guide are instructions for installing and using the various
software packages needed.
This guide is intended for personnel who operate this system. It assumes that you
can perform basic computer operations. MACINTOSH and
WINDOWS NT Platforms are supported in this guide.
Using This Guide
This guide is organized as follows:
Chapter 1 Introduction—describes and illustrates the KODAK
PROFESSIONAL LED II Printer 20P and the KODAK
PROFESSIONAL LED II Processor. This chapter includes
general and introductory information for all of the equipment.
Chapter 2 Using the System—explains how to use the printer and
processor. It includes the step-by-step instructions for daily
operation, from startup to shutdown.
Chapter 3 System Operating Procedures—provides an overview of
the OCPs and all procedures for operating both the Printer
and the Processor.
Chapter 4 Maintaining the Equipment—includes the information that
you need to properly maintain the printer and processor. All
maintenance procedures are categorized by frequency.
Chapter 5 Diagnostics and Troubleshooting—provides an error
code listing, solutions to common operational problems for
the printer, processor and calibration. It also provides
information for obtaining additional help.
Appendix A Ordering Equipment, Accessories, and Supplies—
provides ordering information for many associated items. It
includes information such as size, quantities, and catalog
numbers.
Appendix B Specifications—provides specifications, site
requirements, and environmental information for the system.
Appendix C Calibrating the Printer—describes the calibration
functions for the KODAK Calibration Software and the
Printer Calibration Software.
Appendices D-F Software—explains how to install and use software that is
included with the system.