Kompernass bench KH5001 - Manual (Page 17)

- 15 -
s Hold the button pressed when
the receiver is on hook, till the text
"SET ALARM TIME" is displayed and
the digit for hours starts blinking.
t press the buttons to change
the set digit.
s press the button again till the
digit for minutes starts blinking.
t press the buttons to change
the set digit.
s Finally, press the button again
to confirm your settings.
In the display window a clock symbol
will appear below on the right.If you
have set the time correctly, as descri-
bed under 8.c, you will hear the wake-
up alarm right on time.
If your service provider has the provision
for information about time and date in
his range of telecom services, setting the
correct time is not required.
When the alarm rings, simply pick up
the receiver,to disable the alarm ring
/alarm function. The clock symbol will
disappear from the display window.
If you wish to enable the alarm function
with the preset alarm time again, ...
s Simply press the button briefly
again. The clock symbol will appear
in the display window.
e) Single button emergency call/baby call
You can program your phone in such a
way that a previously saved number gets
selected as soon as any button is pressed
(Emergency Call or Baby Call function).
Enabling the Single button emergency
call:
; Hold the button pressed for
more than 3 seconds till first the
text "ON" is displayed in the win-
dow and shortly thereafter the
text "PLS INPUT NUMBER".
• Now enter the number to be dialled.
; Finally, press the button again
to confirm the settings.
This function is now activated – on
pressing any button the phone will
instantly dial the set number. Using
the automatically set hands-free
function you can conduct conversa-
tions in your room leisurely.
Disabling the Single button emergency
call:
; Hold the button pressed for more
than 3 seconds till the text "OFF" is
displayed. The function is of course
disabled but the saved number is
retained in the memory.
Changing the Single button emergency
number:
• For this, follow the same steps
as described under "Enabling".
f) Deleting lists
If you wish to delete the Incoming call
list or dialled list:
• Retrieve the lists as described
under 9.h).
e-bench KH 5001
IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 15