Kyocera FS-6700 - Manual (Page 101)

2-32
KIR Setting Description
Optimized stripes The current KIR setting is optimal.
Dark vertical stripes The KIR mode currently set is too strong. Set the KIR mode to
Off . Try printing the test pattern again. If you still get dark vertical
stripes, adjust the print density control to a lighter setting. (See the
Mode Select Menu at the end of this manual.)
White vertical stripes The KIR mode currently set is too weak. Set the KIR mode to
On . Try printing the test pattern again. If you still get white vertical
stripes, adjust the print density control to a darker setting. (See the
Mode Select Menu at the end of this manual.)
Status page
KIR Checking Lines
2.9
.
KIR
Le
vel
L
e
v
e
l