Kalorik USK BL 33029 - Manual (Page 5)

Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
Print only
what is inside the frame,
5 USK BL 16909/16911 - 110127
Assembly page 5/24
Fax +32 2 359 95 50
1. Locking cap with feeding
opening
2. Lid
3. Tempered glass mixing jar
4. Sealing ring
5. Stainless steel blades
6. Blade fixing ring
7. Motor block
8. Switch (P / 0 / 1 /2)
9. Jar assembly
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the
requested breaks. Failure to follow this instruction carefully may result
in damage to the motor. The maximum continuous usage time is 1
minute. After 1 minute of continuous use, you should insert a break of
at least 10 minutes.
ASSEMBLY OF THE BLENDER AND USE
CAUTION!
If the blade is disassembled from the bottom of the jar, check the
cleaning section for mounting instructions before continuing.
• Put pouring jar on the motor block and make sure it is correctly
inserted.
• Remove the lid of the blender.
• Fill the pouring jar with the chosen ingredients.
• Close the lid.
• Plug in the appliance.
• Choose the mixing speed with the button on the motor base. The
position 0 corresponds to the stopping of the appliance, the
position 1 to the slow speed and the position 2 to the fast one.
• The position "P" (Pulse) is particular because the button has to be
kept manually. This position is generally used to crush ice in order
to avoid damages on the blades, but it can also be used to
complete the mixing.
• It is also possible to add liquids or other ingredients anytime
without stopping the appliance. You only have to remove the
cap, which closes the feeding opening by turning and raising it
straight up.