Kenwood KCA-BT100 - Manual (Page 7)

English | 7
Dialing Method (For Audio receiver)
Selecting the Dialing Mode
You can dial in five different ways.
1 Enter the dialing method selection mode
Press the [ATT] button for at least 1 second.
"DIAL" or "N-DIAL" is displayed.
2 Select a dialing method
Press the Control knob ([ 38]).
Pressing this knob toggles between the following
dialing methods:
For the Audio receiver with Multi-function Key System:
1 Press the [NEXT] button.
Select the key function section.
2 Press the [1] ("DIAL") – [4] ("IN-C") button.
Display Multi key Dialing method
"DIAL"/
"N-DIAL" [1] ("DIAL") Dial by entering a phone number.
(page 7)
Dial by using the quick dialing function.
(page 7)
"INITIAL"/
"PH-BOOK1" [2]
("PHBK")* Dial by searching for the initial in the
Phone Book (page 8)
"PH.BOOK"/
"PH-BOOK2" [2]
("PHBK")* Dial by searching the Phone Book in the
alphabetical order. (page 8)
"OUT"/
"OUT-CALL" [3] ("OUT-C") Dial by using the outgoing call list.
(page 8)
"IN"/
"IN-CALL" [4] ("IN-C") Dial by using the incoming call list.
(page 9)
3 Exit the dialing method selection mode
Press the [ATT] button for at least 1 second.
• To use the Phone Book, it must have been downloaded
from the cell-phone. For more details, see <Downloading
the Phone Book> (page 5).
• The outgoing call list and the incoming call list are the
lists of calls originated from and received at this unit.
They are not the ones stored in the cell-phone memory.
• * With the Multi-function Key System, pressing the [2]
("PHBK") button switches between the Phone Book
search methods.
2 Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([
¢]) button on the remote controller.
3 Make a call
Press the [DIRECT] button on the remote
controller.
"CALL" or "Call" is displayed.
To erase the entered phone number digit by
digit:
Press the [ 4] button on the remote controller.
• You can input max 32 digits.
• Depending on the type of your control unit, "
|" (all
segments are lit) is displayed for #.
Dialing by Using the Quick Dialing
Function
You can dial by calling the phone number
registered to the preset dial number list. For how to
preset a phone number, refer to <Registering to the
Preset Dial Number List> (page 8).
1 Enter the number dialing mode
Select the "DIAL" or "N-DIAL" display.
Refer to <Selecting the Dialing Mode> (page 7).
2 Select the button corresponding to the preset
dial number
Press the [1] – [3] button.
"Preset #" or "PRESET #" is displayed.
For the Audio receiver with Multi-function Key System:
1 Press the [NEXT] button.
Select the key function section.
2 Press the [1] ("1") – [3] ("3") button.
"DIAL #" is displayed.
3 Make a call
Press the Control knob ([ 38]) for at least 1
second.
"CALL" or "Call" is displayed.
• If the desired number is not registered to the preset dial
number list, "No Name No Number", "No Number", or
"NO-NUMBER" is displayed.
Function of remote controller
Making a Call by Entering a Phone
Number
You can make a call by entering a phone number.
1 Enter the number dial mode
Select the "DIAL" or "N-DIAL" display.
Refer to <Selecting the Dialing Mode> (page 7).