Kingston Technology Bay Networks 2000 User Manual
Page 39
Managing the Switch
32
B.
Under the same box titled “The following network
components are installed,” make sure that NetBEUI is not
installed. To verify this, scroll down through the list box and
look for any lines that have NetBEUI in them. If there are
any lines that include NetBEUI, click on the line, and then
click on the Remove button. This forces the Network
Neighborhood to use NetBIOS over TCP/IP, which is
compatible with the Extranet Switch.
C.
Under the Identity tab, configure the Workgroup to be the same
as your company's internal workgroup. For example,
"baynetworks."
D.
Next under the Identity tab, verify that the Computer Name is
different from your PC at work. Otherwise, you would be
attempting to log a second unit with the same name onto the
network.
E.
If you have made any changes in the Network Control Panel,
click OK, then reboot the system.
5.
Double-click on the Extranet Connection Manager icon.
A.
Enter a new Connection Profile Name.
B.
Create a new Dial-up Connection.
C.
Click the Tool button (next to the Dial-up Connection list box),
select New, and follow the wizard.
D.
Create a new Extranet Connection.
E.
Click the Tool button (next to the Extranet Connection list box),
select New IPsec Connection, and follow the wizard.
F.
Click the Connect button.