King Controls 9754 - Manual (Page 17)

Page 15
SECTION 6
IN-MOTION OPERATION
IMPORTANT: There must be a clear “line of sight” to the southern sky. Mountains, buildings, trees,
telephone poles, etc. can all block the satellite signal from reaching the dish.
The distance driven since last performing a search may affect how long it takes for the
King-Dome to find the satellite.
Satellite TV and receiver technology are constantly changing. If you experience difficulty
go to www.kingcontrols.com or contact the King Controls Service Department at
(800) 982-9920, ext. 373.
1. Turn on TV and Receiver. “Searching for Satellite” or similar will appear on TV screen.
2. On King Dome controller,
momentarily press ON/SEARCH.
3. Press TRACK.
4. If the status light is steady GREEN and your programming does not appear, press the
reset button on your DIRECTV receiver. If using Dish Network, hold the receiver power
button in for 10 seconds to reset your receiver. Consult your receiver owner’s manual for
further details.
5. When receiver reset is complete, select your desired channel and enjoy.
alternating colors
GREEN-flashing
GREEN-steady
Initializing
Potential satellite found
Target satellite found (tracking)
STATUS LIGHT SYSTEM STATUS
Note: While driving and in tracking mode, objects such as bridges, buildings and trees may occasionally block the
satellite signal from reaching the antenna. Line of sight obstructions may cause the picture on your TV to
freeze, pixel or be lost temporarily.
If the antenna does not sense vehicle motion after several minutes, it will enter sleep mode. The antenna
will automatically wake and begin tracking if it senses vehicle motion or a severe drop in satellite signal.
When you park for the evening or any extended period, it is recommended that you perform a stationary
search.