Kolcraft JEEP S45J-T 5/07 - Manual (Page 5)

5
To Assemble Front Wheel
1
Place stroller back on handle bar.
Position front wheel assembly over front
frame tubes.
Align and push front wheel assembly on
to frame. NOTE: You may need to
depress the spring loaded buttons
slightly while assembling the tubes.
NOTE: Make sure that spring loaded
buttons pop through frame. If your
spring loaded button becomes out of
place, take pliers and feed button into
hole.
CAUTION: If spring loaded buttons DO
NOT pop through, front wheel assembly
could fall off during use.
Secure Front Wheel Assembly to the
front frame tubes using ½” screws. The
½” screws should be aligned into the 2
holes closest to the spring loaded but-
tons. Secure with a Phillips screwdriver
on both sides.
2
2 & 3
3
Spring
Loaded
Buttons
4
4
Spring
Loaded
Buttons