Konica Minolta DiMAGE S414 - Manual (Page 96)

96 DATA-TRANSFER MODE
Choose the recommended search for a suitable
driver. Click “Next.”
Choose to specify the location of the driver. The
browse window can be used to indicate the
driver location. The driver should be located in
the CD-ROM drive at :\Win98\USB. When the
location is shown in the window, click “Next.”
Manual Installation
To install the Windows 98 driver manually, follow the instructions in the connecting-the-camera-to-a-
computer section on page 93.
When the camera is plugged into the computer,
the operating system will detect the new device
and the add-new-hardware-wizard window will
open. Place the DiMAGE software CD-ROM in the
CD-ROM drive. Click “Next.”