Kompernass KH123 - Manual (Page 8)

- 6 -
Fitting / removing brush heads
To remove the brush head 1, turn it clockwise and then pull
it upwards.
To fi t the brush head 1 place it slightly off set on the hand
element and then turn it anti-clockwise.
The brush head 1 must engage on being put back on. To
avoid damage to the appliance, use only original brush heads.
(For replacement brush heads, see the order card)
Operation
This toothbrush has 3 diff erent performing levels:
- “Clean”: normal speed level, orange LED 8
For cleaning the teeth.
- “Soft”: slow speed level, green LED 7
For cleaning the teeth of people with sensitive gums.
- “Pulse”: variable speed levels, yellow LED 6
For massaging the gums.
• Press the on/off switch 9 once to switch the level “Clean”
on. The “Clean” LED 8 glows.
• Press once more to switch to the level “Soft”. The “Soft”
LED 7 glows.
• Press it a third time to switch to the level “Pulse”.
The “Pulse” LED 6 glows.
• To switch the toothbrush off , press once more on the on/
off switch 9.
Brushing one’s teeth
Warning
Due to the unaccustomed operation some gum bleeding may
initially occur, this is normal. Should this continue for more
than two weeks, consult your dentist.
IB_KH123_45634_LB6.indd Abs1:6 IB_KH123_45634_LB6.indd Abs1:6 14.01.2010 9:16:21 Uhr 14.01.2010 9:16:21 Uhr