Kyocera Prisma KX17 - Manual (Page 39)

User Guide for the Kyocera Prisma Phone 31
2. Enter your four-digit lock code.
3. Select Erase Contacts .
4. Select Yes . A message appears: “Erase ALL
contacts?”
5. Select Yes and press to erase all
contacts.
Network settings
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
1. Select Menu
→
Settings
→
Network
→
Set Phone Line .
2. Select one of the two lines and press .
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Note: Enable TTY only when
using the phone with a TTY device.
1. Connect the TTY device to the phone.
2. Enter from
your keypad.
3. Press to select the TTY option.
4. Press to clear the message.
5. Press down to highlight an option.
6. Press .
Note: TTY/TDD service may not be available.
Check with your service provider for more
information.
Ensuring Call Privacy
You can set your phone to sound an alert if
enhanced CDMA voice privacy is lost or regained
(check with your service provider to see if CDMA
voice privacy is enabled in your area). When voice
privacy is activated during a call, you will see a
message and
on your screen.
To set this alert:
• Select
Menu
→
Settings
→
Network
→
Privacy Alert
→
Enabled .