Kenwood DDX7017 DDX7047 - Manual (Page 66)

66 | English
Control during DVD Video or Video CD Playback
AV Interface
You can set audio and visual (AV) interface parameters. <DDX7047 AV-IN (AV-IN1) only>
Displaying the AV I/F 1 screen
AV I/F 1 screen
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (page 76)
3 Calls the Setup Menu. (page 58)
4 Selects a navigation system connection. (
RGB)
"RGB": Allows the Kenwood’s Navigation System
to connect via its interface cable.
"AV-IN1": Allows a third-party navigation system to
connect via the AV INPUT1 port.
"Off": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
5 Sets a name to be displayed when you select a
system that is connected via the AV INPUT1 port.
(
VIDEO1)
• If you have set the navigation system connection to "AV IN1",
the display is fixed to "NAV".
6 Sets an image display of the system that is
connected via the AV INPUT2 port. * 1 ( Off)
"Off": When the image source is switched, an
image entered via the AV INPUT2 port is
displayed.
"On": When an image signal is entered via the
AV INPUT2 port, this image is displayed.
7 Sets a name to be displayed when you select an
image of the system that is connected via the AV
INPUT2 port. (
VIDEO2) (Function of DDX7017)
8 Displays the AV I/F 2 screen.
• If is not shown, touch
or to display it.
• * 1 This function can be use AV INPUT1. (DDX7047)
O f f
1
2
5
4
6
4
5
8
3
7 7