Kompernass Bench KH 2222 - Manual (Page 10)

10 KH 2222 11 KH 2222
1 Insert one cinch cable into each of the cinch jacks.
2 Insert the other end of the cinch cable into one of the
pairs of jacks
• AUX L/R
• TV L/R
• CD L/R
on the back of the subwoofers. It does not matter
which of the three pairs of jacks you use. If you would
like to connect several audio/video devices simultane-
ously, it is less confusing if you connect them to the
jacks with the relevant marking, i.e.:
• a television to the jacks marked TV
• a CD player/a hifi system to the jacks marked CD
• other devices to the jacks marked AUX.
Note:
It may perhaps be necessary to adjust the settings on
the connected audio/video device so that the sound
playback works properly with the surround sound sys-
tem. In case of doubt consult the operating instructions
of the audio/video equipment.
... Connection via Scart /Euro AV jacks
If the audio/video equipment to be connected does not
have any of the named audio outputs, but instead has
a scart jack: Connect the device by using a scart cinch
adapter cable. This can be done e.g. if you would like to
play back the sound of a stereo television with the sur-
round sound system. Scart cinch adapter cables can be
bought in specialized audio/video shops.
To connect the audio/video equipment in this manner:
1 Insert the scart plug of the scart cinch adapter cable into
the jack marked Scart/Euro AV of the audio/video device.
2 Insert the cinch plug of the scart cinch adapter cable
into one of the pairs of jacks
• AUX L/R
• TV L/R
• CD L/R
on the back of the subwoofer.
Note:
It may perhaps be necessary to adjust the settings on
the connected audio/video device so that the sound
playback works properly with the surround sound sys-
tem. In case of doubt consult the operating instructions
of the audio/video equipment.
... Connection via the headphone
output
If the audio/video equipment to be connected does not
have any of the named audio outputs, but instead has a
headphone output: Connect the device by using a plug-
type/cinch adapter cable. This can be done, if other out-
puts of the audio/video device are already occupied. Plug-
type/cinch adapter cables can be bought in specialized
audio/video shops.
To connect the audio/visual equipment in this manner:
1 Insert the plug of the plug-type/cinch adapter cable
into the headphones jacks of the audio/video device.
If the plug of the adapter cable does not fit into the
headphones jacks of the audio/video device: Use a 3.5
to 6.5 mm plug-type adapter (can be bought in spe-
cialized audio/video shops) additionally. Put it on the
plugs on the adapter cable.
2 Insert the cinch plugs of the plug-type/cinch adapter
cable into one of the pair of jacks
• AUX L/R
• TV L/R
• CD L/R
on the back of the subwoofer.
Note:
It may perhaps be necessary to adjust the settings on
the connected audio/video device so that the sound
playback works properly with the surround sound sys-
tem. In case of doubt consult the operating instructions
of the audio/video equipment.
The surround sound system is now ready for operation.
7. Using the Surround
Sound System
After you