Kompernass KH 1148 - Manual (Page 9)

- 7 -
The fan switches on and the control
lamp
ᕤ lights up in red.
The Fan Heater is fitted with switching
levels:
Oscillation function
The Fan Heater is fitted with an
automatic oscillation function.
• Place the switch for the oscillation
function ᕢ into position „I“.
The Fan Heater slowly swings itself alter-
natively in both sideward directions.
• When you wish to finish the oscilla-
tion function, place the switch for the
oscillation function
ᕢ into position
„O“.
Switching off
1. When you wish to switch off the Fan
Heater, place the function switch ᕣ
in the position „0“.
Position Status of the Fan Heater
0 OFF
Fan, no heating
1
Warm air flow
(1000 W)
2
Hot air flow
(2000 W)
• After every use remove the plug
from the wall socket.
Room temperature setting
• Place the function switch
ᕣ on
the desired heating level, 1 or 2.
• Turn the thermostat regulator ᕨ
to HI.
• As soon as the desired room tempera-
ture has been reached, turn the ther-
mostat regulator
ᕨ slowly back, until
a light resistance is felt and a click is
heard.
The Fan Heater now switches itself on
automatically as soon as the temperatu-
re falls below the programmed level.
When the temperature in the room
falls below the programmed level,
the Fan Heater switches itself on
automatically. The Fan Heater swit-
ches itself off automatically as soon
as the programmed temperature
has once again been reached.
Transportation / Storage
ƽ
Danger of Burns!
Only carry the Fan Heater with the carry-
ing handle provided for the purpose
ᕡ.
ƽ
Attention
Pack the Fan Heater away when it has
first cooled down. Otherwise, you could
burn yourself and damage other items.
• Should you wish to store the applian-
ce for an extended period or send it
through the post, use the original
packaging.
KH 1148
KH1148_Heiz_IB_UK 10.08.2006 11:52 Uhr Seite 7