Kenwood CT-403 - Manual (Page 11)

11
Fast Forward and Rewind
2 Press the 1 key or ¡ key.
1 Stop playback.
1: Fast tape winding in the | direction
¡: Fast tape winding in the \ direction
Listening to cassette tapes
÷ When taking out the tape, press the area marked PUSH/
OPEN 0 after the tape transport has stopped completely.
To stop playback
(dB) — —5 0 +3 +6 (dB)
(dB) — —5 0 +3 +6 (dB)
(dB) — —5 0 +3 +6 (dB)
7
7
1 ¡
÷ Press the stop (7) key to stop fast tape winding.
Determine the playback conditions.
2
1 Select the Dolby NR mode.
2 Select the playback mode.
÷ Set to OFF the Dolby NR key when playing a tape recorded with-
out using Dolby NR.
3
Start playback.
1 Dolby NR on
2 Dolby NR off
Relay playback
(CT-403/KXF-W3030 only)
DOLBY NR
(dB) — —5 0 +3 +6 (dB)
(dB) — —5 0 +3 +6 (dB)
REV.MODE
÷ Each press switches the indication.
1 “ [” :Relay playback of two sides of tapes in decks A and B is
repeated.
2 “ ”” :Relay playback is not available with this setting.
3 “ “” :Relay playback of one side only for deck A and deck B,
and then playback stops.
@ # 7
(dB) — —5 0 +3 +6 (dB)
÷ Tapes are played in the directions indicated by their respective indica-
tors on the display.
÷ The playback starts with the deck the play key of which is pressed.
Press stop ( 7) key of the deck that is
playing.
To Stop relay playback
(dB) — —5 0 +3 +6 (dB) 7
This function plays back the tapes in both decks A and B
continuously and repeatedly.
DOLBY NR DOLBY NR
Lit Goes off
Dolby NR on Dolby NR off
Load cassette tapes in both decks. 0
1