Kawai EP3 - Manual (Page 48)

Page
48
4
FUNCTION SETTINGS
10) SEND PROGRAM CHANGE NUMBER
This function allows the EP3 digital piano to send program change numbers. Using this function, any program
change number from 1 to 128 can be sent to external MIDI devices and instruments.
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the CLAVI/GUITAR button.
The LED indicators for the TOUCH, TRANSPOSE, and CLAVI/GUITAR buttons
will start to fl ash, indicating that the Send Program Change Number function
has been selected.
The name of the function ‘PG#’ (Program #) and a program change number will be shown in the LED display.
Step 2
Press the
T or S VALUE/BALANCE buttons to select the desired program change number.
The program change number can be set within the range of 1 to 128.
Step 3
Press both
T and S VALUE/BALANCE buttons simultaneously to send the program change number.
Step 4
Press the TOUCH or TRANSPOSE button to exit Send Program Change Number mode.
The LED indicators for the TOUCH, TRANSPOSE, and CLAVI/GUITAR buttons will stop fl ashing.
PROGRAM CHANGE NUMBER
2
Press the CLAVI/GUITAR button Press and hold both buttons
1