Kyocera Angel SE47 - Manual (Page 43)

User Guide for the Kyocera SE44 phone 21
Note: When a T2T call is connected, there is a “no speaker” time-out. If no
one takes the floor of a T2T call for the duration of this time-out, then the
T2T call is disconnected automatically.
6. Press again to speak.
7. To end the T2T call, press , or select End Call from the menu screen.
Adding a member to a T2T group
1. Select Menu
→
Touch2Talk
→
Manage Groups
→
Add Member. The Select
Group screen appears. Press up or down to highlight the group to
which you want to add the new member.
2. Press . The Add Member screen appears. Highlight the name of the
new member that you want to add to the group.
Note: If no T2T contact names appear, or if the desired contact is not on the
list, then perform steps 5 through 9 of “Creating T2T Groups” on page 18.
3. Press to choose Select. A check mark appears beside the contact
name.
4. Press right to highlight Save and press . Your Slider phone sends
an invitation to the members you have added to the group.