Kenwood MDX-G1 - Manual (Page 30)

30 EN
High-speed recording of the CD
track being played (Single-track
recording)
(1) Perform the operations in steps 1 to
4 (page 29).
(2) Play the CD track to be recorded.
(3) Press the MD O.T.E. key on the re-
mote.
When you are operating the main unit,
see step
4 of “Recording CD onto
MD” (page 17).
Recording starts after returning to the
beginning of the current track.
To stop recording in the middle :
Press the
7STOP key.
÷ Be careful not to switch the power off or ap-
ply shock or vibrations to the system while
“MD WRITING”is displayed.
÷ Once high-speed recording is completed, it
is not permitted to record the same CD by
high-speed recording within 74 minutes af-
ter the start of previous high-speed record-
ing. In case this restriction is applied, the dis-
play shows the time until the next high-speed
recording becomes possible.
It is also prohibited to continue high-speed
of more than 81 tracks within 74 minutes.
÷ If you want to record the same CD again in
less than 74 minutes, set “REC SPEED” to
“CD
=MD NORM” and perform the MD
O.T.E. recording (pages 16 to 17).
Time until re-recording is available
TUNED AUTO TRACK NO. O.T.E.
HIGH-SPEED
SP REC
EX. BASS
MHz
MD
CD
*5053/28-33/EN 5/29/01, 11:00 AM 30