Back panel description – Krell Industries DVD Standard User Manual

Page 19

Advertising
background image

Back Panel Description

See Figure 2 on page 14

Krell DVD Standard

15

20 Left and Right Balanced Audio Outputs
The DVD Standard is equipped with one pair of left and right bal-
anced analog audio outputs via XLR connectors.

21 Left and Right Single-ended Audio Outputs
The DVD Standard is equipped with one pair of left and right single-
ended analog audio outputs via RCA connectors.

22 Composite Standard Video Output
The DVD Standard is equipped with a composite standard video out-
put via an RCA connector.

23 S-Video Standard Video Output
The DVD Standard is equipped with an S-video output via a 4 pin
mini-DIN connector.

24 Component Standard Video Output
The DVD Standard is equipped with a component standard video
output via RCA connectors. Component video uses three wires
(labeled Y, Pb, and Pr on the back panel) to convey the video signal.

25 NTSC/PAL Switch
The DVD Standard is equipped with a switch to set the video format
of the video signal to NTSC or PAL.

26 Progressive 480p Video Outputs R, G, and B
The DVD Standard is equipped with a progressive RGB video output
via BNC connectors.

ANALOG AUDIO
OUTPUTS

STANDARD VIDEO
OUTPUTS

PROGRESSIVE SCAN
VIDEO OUTPUTS

If you playback Macrovision-encoded DVDs using the RGB outputs, the
resulting picture will be tinged with green. Macrovision does not support the
RGB format.

Note

Advertising