If range does not operate, For cleaning and maintenance, If you need assistance or service – KITCHENAID 30" (76.2 cm) User Manual

Page 7: Moving the range, Installation instructions, Import ant: read and save these instructions, If you need assistance, If you need service, Home appliances, Warning

Advertising
background image

30" (76.2 cm)

Sealed Burner

Gas

Freestanding and

Slide-in Ranges

with self-cleaning thermal/con

vection oven

Installation Instructions

Part

No

.9758639

IMPORT

ANT:

Read and save

these instructions.

IMPORT

ANT :

Installer:Lea

ve

Installation Instructions

with the homeowner

.

Homeowner:

Keep Installation

Instructions and anti-tip br

acket

template for future ref

erence.

Save

Installation Instructions f

or local

electrical inspector’

s use.

If range does not

operate...

• Check that the circuit breaker is not tripped or the

house fuse blown.

• Check that the power supply cord is plugged into

the wall receptacle.

• Check that the gas supply is on.

• Check that the regulator shutoff valve is in the

“OPEN” position.

For cleaning and

maintenance...

If removing the range is ever necessary for
cleaning or maintenance, shut off gas supply to
range. Disconnect the gas and electrical supply.

If the gas or electrical supply is inaccessible, lift
the range slightly at the front and pull the range out
away from the wall. Pull the range out only as far
as necessary to disconnect the gas and electrical
supply lines.

Remove the range to complete cleaning or
maintenance.

Move range back into operating position. Remove
drawer. Level the range. Connect gas line to range
and check for leaks. Plug in range or reconnect
power. Make sure that left rear leveling leg is
engaged in the anti-tip bracket.

If you need assistance...

The KitchenAid Consumer Assistance Center will
answer any questions about operating or
maintaining your range not covered in the
Installation Instructions. The KitchenAid Customer
Interaction Center is open 24 hours a day, 7 days a
week. Just dial 1-800-422-1230 — the call is free
within the continental United States.

When you call, you will need the range model
number and serial number. Both numbers can be
found on the model/serial rating plate located on
the oven frame behind the oven drawer.

If you need service...

In the event that your KitchenAid appliance should
need service, call the dealer from whom you
purchased the appliance or a KitchenAid-authorized
service company. A KitchenAid-authorized service
company is listed in the Yellow Pages of your
telephone directory under “Appliances — Household
— Major — Service and Repair.”

You can also obtain the service company’s name
and telephone number by dialing, free, within the
continental United States, the KitchenAid Consumer
Assistance Center telephone number,
1-800-422-1230. A special operator will tell you the
name and number of your nearest KitchenAid-
authorized service company.

Maintain the quality built into your KitchenAid appliance
— call a KitchenAid-authorized service company.

Part No. 9758639
© 2004 KitchenAid.
® Registered Trademark of KitchenAid, U.S.A.

Prepared by KitchenAid, Benton Harbor, Michigan 49022

Printed in U.S.A.

03/2004

HOME APPLIANCES

HOME APPLIANCES

Tip Over Hazard

A ch

ild or adult can tip the range and be

killed.

Connect anti-tip bracket to rear rang

e f

oot.

Reconnect the anti-tip bracket,

if the range

is moved.

Failure to f

ollow these instructions can

result in death or serious burns to c

hildren

and adults.

WARNING

Tip Over Hazard

A child or adult can tip the range and be
killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range
is moved.

Failure to follow these instructions can
result in death or serious burns to children
and adults.

WARNING

anti-tip bracket

range foot

When moving range, slide range onto cardboard or
hardboard to prevent damaging the floor covering.

If removing the range is necessary for cleaning or
maintenance:

1. Remove the storage drawer.

2. Shut off the gas supply to the range.

3. Slide range forward, away from the wall, just far

enough to disconnect the gas and electric supply
lines.

4. Slide range forward to complete cleaning or

maintenance.

5. Making sure the anti-tip bracket is installed:

• Look for the anti-tip bracket securely attached

to floor.

• Slide range back so rear range foot is under

anti-tip bracket.

6. Check that range is level.

7. Reconnect gas line to range and check for

leaks.

8. Plug in range or reconnect power.

9. Reinstall storage drawer.

Moving the range...

9758

639

9758639

Advertising