Adjusting alarm-timings, Switching the alarm on – Kompernass KH 2236 User Manual

Page 9

Advertising
background image

- 7 -

Select the radio wavelength by me-
ans of the AM/FM wave band selec-
tor

f

.

Now select the desired transmitter
through turning the tuning knob

s

.

Note:

To improve the reception of transmit-
ters in the FM range slowly move the
end of the wire aerial in various direc-
tions. When you have found the best
reception for the desired transmitter,
fix the wire aerial into this position
e.g. with adhesive tape. For the re-
ception of AM transmitters, an aerial
is built into the appliance. For impro-
ved reception, alter the position of the
appliance in radio mode.

Adjusting Alarm-Timings

If the clock is set correctly, as described
above:
Whilst pressing and holding down the
button ALARM

e

:

Press several times in succession,
or simply press and hold the button
HOUR

q

, to adjust the hour setting.

Release the button HOUR

q

, as soon

as the desired hour setting appears in
the display

i

.

Press several times in succession, or
simply press and hold the button
MIN

w

, to adjust the minute setting.

Release the button MIN

w

as soon

as the desired minute setting appears
in the display

i

.

The adjusted time will be automatically
accepted as soon as the button ALARM

e

is released.

Switching the Alarm ON

If the clock and alarm time are set
correctly, as described above:

Push the slider switch

o

into the posi-

tion AUTO. The alarm is now switched
on. For control purposes, a point
appears to the left in the display

i

.

You will be woken by the radio if ...

the volume controller VOLUME

d

is

set to a level high enough to awaken
you.

You will be woken by the signal tone if...

the volume controller VOLUME

d

is

turned down so far that it switches off
with an audible click, i.e. it is in the
position BUZZ.

IB_KH2236-39_GB_LB6 12.10.2007 16:03 Uhr Seite 7

Advertising
This manual is related to the following products: