Kambrook KJ12 - Manual (Page 4)

4
USING YOUR KAMBROOK
CITRUS X-PRESS
Wash all removable parts in hot, soapy
water. Rinse and dry thoroughly. It is
recommended NOT to wash any parts of
the Kambrook Citrus X-press in the
dishwasher as the harsh detergents and
high water temperature will discolour and
distort these parts.
WARNING:
DO NOT IMMERSE THE MOTOR
BASE IN WATER OR ANY OTHER
LIQUID.
ASSEMBLING
Place the Citrus X-press motor base on a
level, flat surface. Place the juice jug over
the drive shaft on the motor base and turn
clockwise until it locks into position.
Then sit the strainer dish on top of the
juice jug, ensuring the protruding piece on
the strainer dish is placed correctly on top
of the jug handle.
Then fit the small cone onto the drive shaft
and push down lightly, a clicking sound will
be heard. For larger citrus fruits (grapefruits
and oranges), after the small cone is in
place, gently push the larger cone on top.
Note: indent piece on the large cone must
be placed over the scarper blades.
Important:The smaller cone must be in place first
before larger cone can be fitted.
JUICING
Wash your selected citrus fruits and cut
in half.
Plug the power cord into a 230/240V
power outlet and then turn the power on.
Then press one half of the fruit firmly
down onto the cone.The motor will
automatically start and the juicing cone will
begin to rotate. Lifting fruit off the cone
then reapplying pressure may cause the
cone to automatically change direction.This
is normal and ensures that the fruit is
thoroughly juiced.
To stop, lift the fruit from the cone. Juicing
will automatically stop.
ALWAYS turn the power off at the power outlet and
then unplug power cord, before unlocking juice jug,
strainer dish and cones or cleaning.