Krell Industries KCT - Manual (Page 16)

12 Krell Current Tunnel
Back Panel Description
See Figure 2 on page 11
The KCT preamplifier back panel provides all input and output connections, remote
control inputs and outputs, and power connection. Back panel features and their
descriptions follow.
Inputs
17 B-1 and B-2 Left and Right Balanced Inputs
The KCT is equipped with two pairs of balanced analog source inputs with XLR
connectors.
18 S-1, S-2, and S-3 Left and Right Single-ended Inputs
The KCT is equipped with three pairs of single-ended analog source inputs with RCA
connectors.
19 Tape Left and Right Inputs
The KCT is equipped with one pair of single-ended tape source inputs with RCA
connectors.
20 C-1 and C-2 Left and Right CAST Inputs
The KCT is equipped with two pairs of CAST inputs with 4-pin bayonet connectors, for
use with Krell CAST-equipped input devices.
Tape Output
21 Tape Left and Right Outputs
The KCT is equipped with one pair of tape outputs with RCA connectors.
Main (Zone) Outputs
The following outputs are for the main zone.
22 Preamp Left and Right Outputs
The KCT is equipped with two pairs of preamplifier outputs: one pair of balanced
outputs with XLR connectors and one pair of single-ended outputs with RCA
connectors.
23 CAST Preamp Outputs
The KCT is equipped with two pairs of CAST preamplifier outputs with 4-pin bayonet
connectors, for use with Krell CAST-equipped amplifiers.
Zone 2 Outputs
The following outputs are for zone 2.
24 Balanced Left and Right Outputs
The KCT is equipped with one pair of balanced outputs with XLR connectors.