Operation – Kompernass KH 2282 User Manual
Page 6
- 4 -
Operation
Switching On and Off
•
To switch the radio on, turn the On/Off switch
with volume controller
q
to the left, until you
feel that a slight resistance has been overcome.
•
To switch the radio off, turn the On/Off switch
with volume controller
q
to the right, until you
feel that a slight resistance has been overcome.
To control the Volume
•
Turn the On/Off switch with volume controller
q
to the left to increase the sound volume.
•
Turn the On/Off switch with volume controller
q
to the right to reduce the sound volume.
Radio functions
Switch the radio on.
Selecting a waveband
•
Press the button
AM
w
for medium wave (MW)
resp. the button
FM
y
for short wave (VHF)
reception.
•
Extend the FM wire antenna
d
out.
Adjusting the frequency
•
Using the frequency regulator
u
adjust the
desired frequency on the AM (kHz) resp. FM
(MHz) scale
a
.
•
Adjust the wire antenna
d
positioning so that
radio reception is optimal.
Displaying the date and time
Press the button SET
t
...
...1x, to show the set alarm time.
...2x, to show the date.
After about 2 seconds the display reverts to its nor-
mal time display.
...3x, to show the running seconds.
...4x; In the display the time is shown.
Adjusting Time and Date.
1.
Press one of the buttons MODE
r
four times.
The number of the month is shown.
2.
With the button SET
t
adjust the month.
3.
Press one of the buttons MODE
r
.
The number of the date is shown.
4.
With the button SET
t
adjust the date.
5.
Press one of the buttons MODE
r
.
The hour indicator appears.
6.
With the button SET
t
adjust the hour.
For time display in the 12 hour format, select
the hours 1-11 A for the hours of the forenoon
and the hours 12-11 P for the hours of the after-
noon.
For time display in the 24 hour format, select
the hours 0-23 H.
7.
Press one of the buttons MODE
r
.
The minute indicator appears.
8.
With the button SET
t
adjust the minute.
9.
Press one of the buttons MODE
r
.
The time display is now programmed. Press the but-
ton SET
t
to start the clock.
Adjusting the alarm signals
You can programme an hour signal or an alarm
time to have yourself alerted with an alarm signal.
1.
Press the button MODE
r
once, to display the
alarm time adjustment.
2.
Press one of the buttons SET
t
several times
to adjust the alarm sound for the alarm time
or the hour signal:
:
Alarm sound for alarm time
(Alarm signal for wake-up time)
+ :
Alarm sound for alarm time and hour
signal
(Alarm signal for wake-up time and hour
signal for each full hour)
: Hour
signal
(Hour signal for each full hour)
no
symbol:
no alarm time or hour signal
programmed.
IB_KH2282_E6275_EN.qxd 10.04.2008 14:54 Uhr Seite 4