Kenwood KCA-BT300 - Manual (Page 20)

20 | KCA-BT300
Registering Bluetooth device
To make your Bluetooth device (cell-phone or audio
player) usable with this unit, you need to register
it (pairing). You can register up to five Bluetooth
devices to this unit.
When registering from Bluetooth devices
1 Turn on the control unit.
2 Start registering a unit by operating the
Bluetooth device.
By operating the Bluetooth device, register the
hands-free unit or audio player (pairing). Select
"KCA-BT300" from the list of connected units.
3 Enter a PIN code
Model-A, B, C, D, E, F:
Input the PIN code registered as mentioned in
<Registering PIN Code> (page 21).
PIN code is set to "0000" as the default.
Model-G:
Enter "0000" as a PIN code.
Check that registration is complete on the
Bluetooth device.
4 By operating the Bluetooth device, start hands-
free or audio connection.
When registering from this unit (Function of
Model-A, B, C, D, E, F)
1 Select the Bluetooth Device registration mode
Select the "Device Regist"/ "DVS REGIST"/ "DVS
REG"/ "DVC REG" display.
2 Press the decision button for at least 1 second.
Search for the Bluetooth device.
When search is completed, "Finished" is displayed.
3 Select the Bluetooth Device
Operation type Operation
Selects the Bluetooth
device Push the selection button towards up
or down.
Determine the selection Press the decision button
4 "PAIRING" is displayed
If "Pairing Success"/"PAIRING OK"/"PAIR OK" is
displayed, proceed to step 7.
If "PIN Code NG"/"PAIR NG" is displayed, press the
decision button. Then enter the PIN code (steps 5
and 6).
5 Input the PIN code
Operation type Operation
Select the numbers. Push the selection button towards up
or down.
Move to the next digit. Push the selection button towards right.
Delete the last digit. Push the selection button towards left.
6 Transmit the PIN code
Press the decision button for at least 1 second.
If "Pairing Success"/"PAIRING OK"/"PAIR OK" is
displayed, registration is completed.
7 Return to the device list
Model-A, B, D, F:
Press the decision button.
Model-C:
Press the decision button for at least 1 second.
Model-E:
Press the [FNC] button.
8 End device registration
Exit Menu mode.
⁄
• You can also register from the Bluetooth device side. For
the PIN code necessary for registration, see <Registering
PIN Code> (page 21).
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
• If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth device>
(page 21).
• For how to operate the Bluetooth device, refer to the
Instruction Manual that comes with your Bluetooth
device.
Function Operation
Operation buttons
Operation buttons are grouped and described in
common.
Operation buttons in each group are described as
follows
Group Decision
button
Selection button
Up Down Left Right
A [AUD] [FM] [AM] [ 4] [ ¢]
B [AUD] [AUD] knob
C [ENTER] [u] [d] [ ] [ ]
D [ 38] Control knob
E [ 38] Control knob
F Control knob Control knob
G [ 38] Control knob