Kenwood DDX8032BTM - Manual (Page 8)

8 | DDX8032BT/DDX8032BTM
1. Check the installation position of the microphone
(accessory !).
2. Remove oil and other dirt from the installation
surface.
3. Install the microphone.
4. Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape
to fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory !
Installing the Microphone Unit Installing the Escutcheon
For General Motors
1. Cut out accessory 6 to meet the shape of the
opening of the center console.
2. Attach accessory 6 to the unit.
For Volkswagen
1. Attach accessory 0 to the unit.
Accessory 6
Cut out to meet the shape of
the opening in the vehicle.
Accessory 0
Install the microphone as far as possible
from the cell-phone.