Kodak 3 User Manual
Page 18
Cintel International Ltd.
diTTo User Guide
Issue 3
18
Tools: D/SCO Control (If Option is fitted)
This tool provides control over the degree of scratch and dust removal of the D/SCO option.
While observing a scanned scratched or dusty image on the main GUI, adjust the slide bar till the scratch/dust is
minimised. This should be very close to the ‘0’ position.
Fig 27 D/SCO Control Window
Fig 28
Fig 29
Fig 30
D/SCO can also output a “defect Map” of Dust and
Scratches in the Alpha channel; of a DPX file.
This is useful where downstream software packages
can work on the DPX images at a later stage to provide
fast image “clean up”.
This can viewed with the Scratch setting and the level
adjusted with Threshold.
The defect map can be viewed at the same time as the
scanned image using Combined.
Fig 31