Kingsford 11301648 - Manual (Page 8)

2
1
ASSEMBLY
Page 8
FIRST, GET A HELPER!
This unit is heavy and requires a second person for lifting and moving. NEXT, pick a suitable
location to work. Open the carton and slit the corners so that the carton lays flat. This will give you a protective surface
during assembly.
To begin assembly,
Attach Firebox End Panel to Front/Rear Firebox Panels using (4) 1/4-20x1/2” Screws and 1/4-20
Flange Nuts
. Attach Firebox End Panel to Front/Rear Firebox Panels using 1/4-20x1/2” Screws and 1/4-20 Flange
Nuts.
Place Firebox as shown in illustration below. Attach (2) Legs with Caster Sockets to right side of Firebox using (4) 1/4-
20x1/2” Screws. Attach (2) remaining Legs to left side of Firebox using (4) 1/4-20x1/2” Screws.
Firebox End Panel
Rear Firebox Panel
Firebox End Panel
Front Firebox Panel
1/4-20x1/2” Screws
1/4-20 Flange Nuts
1/4-20x1/2”
Screws
1/4-20x1/2”
Screws
1/4-20x1/2” Screws
Front of Firebox
Left Rear Leg W/O Caster Sockets
Left Front Leg W/O Caster Sockets
Right Rear Leg W/Caster Socket
Right Rear Leg W/Caster Socket
Side shelf mounting holes
to be facing opposite legs
Caster Socket