Kenwood KDC-MP4029G - Manual (Page 29)

KDC-MP4029/MP4029G/MP3029/3029/2029
English | 29
Connecting Wires to Terminals
ANT.
CONT
MUTE
P.CONT
FRONT L
FRONT R
REAR L
REAR R
– +
FRONT
Battery
Ground wire (Black) - (To car chassis)
FM/AM antenna input
Fuse (10A)
Wiring harness
(Accessory
1)
Ignition wire (Red)
Battery wire (Yellow)
ACC
Car fuse box
If no connections are made, do not let the wire come out from the tab.
When using the optional power amplifier,
connect to its power control terminal. Power control wire (Blue/White)
Motor antenna control wire (Blue)
Depending on what antenna you are using,
connect either to the control terminal
of the motor antenna, or to the power
terminal for the booster amplifier of the
film-type antenna.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Ignition key switch
Car fuse box
(Main fuse)
TEL mute wire (Brown)
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
KDC-3029 KDC-MP4029/
MP4029G//2029
KDC-MP3029
A Front left output (White)/
Front right output (Red)
— —
B To KENWOOD disc
changer/ External
optional accessory
To KENWOOD disc
changer/ External
optional accessory —
To connect these leads, refer to the
relevant instruction manuals.
A
B
To connect the KENWOOD
navigation system, consult your
navigation manual.
Rear left output (White)/
Rear right output (Red)