Kenwood DG1 - Manual (Page 6)

11 10
Warranty Claims
All questions regarding warranty should be directed to:
Xitel Multimedia
13276 Research Blvd
Suite 208-A
Austin, TX, 78750
Phone: 512 331 5799
Email: [email protected]
FCC Part 15 Class B Registration Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment generates and uses radio frequency energy and if not installed and used properly, that is
in strict accordance with the manufacturer's instruction, may cause interference to radio and television
reception. It has been type tested and found to comply with the limits for a Class B computing device in
accordance with the specifications in Subpart B of Part 15 of FCC Rules & Regulations, which are
designed to provide reasonable protection against such interference in a residential installation. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient the receiving antenna (2) Relocate the computer with respect to the receiver (3) Move the
computer away from the receiver (4) Plug the computer into a different outlet so that the computer and
receiver are on different branch circuits. If necessary, the user should consult a dealer or experienced
radio/television person for additional suggestions. The user may find the booklet prepared by the Federal
Communications Commission helpful: "How to Identify and Resolve Radio-TV Interference Problems". This
booklet is available from the US Government Printing Office, Washington DC 20402. Stock No 004-000-
00345-4. Shielded cables and certified Class B peripherals
must be used on this product. Using unshielded cables or
uncertified peripherals may result in this unit not complying
with FCC Rules Part 15. Changes or modifications not
expressly approved by the manufacturer could void the user's
authority to operate this equipment.