Kompernass KH 3462 - Manual (Page 7)

- 7 -
• First place the plastic disc and then the metal
disc of the biscuit attachment q into the meat
grinder casing t (see fold-out side).
Position the biscuit attachment q so that the
indentations on the biscuit attachment q lie on
the fixing points in the meat grinder casing t .
• When everything has been correctly assembled,
screw the ring clamp a on until it is handtight.
• Re-attach the pattern strips q to the front part of
the biscuit attachment q . Ensure that the grip
on the pattern strips q points away from the
appliance. If it does not, you will not be able to
adjust the pattern, which is located directly on
the grip.
• Assemble the meat grinder casing t as described
under a).
• To dismantle it, you must first remove the pattern
strips q before you can screw open the ring
clamp a and take the biscuit attachment q out.
6. Operation
Important!:
Do not use the appliance for longer than 15 minutes
continuously. To avoid an overheating of the app-
liance, after such a period switch it off and allow it
to cool down for ca. 30 minutes.
Important!:
NEVER activate the buttons ON or REV, with a
change of rotation direction, if the appliance motor
has not come to a complete stop. This could
damage the motor.
a) Operating the appliance
Once the appropriate attachments have been fixed:
• Place the appliance where it will at all times be
absolutely stable and under no circumstances
could it fall off of the work surface or in any
way come into contact with water (due to vibra-
tions or becoming snagged in the power cable).
Vibration is unavoidable when it is working.
Warning:
Never touch a machine, which is plugged in or is
operational when it happens to fall or land in water
– or in the case of other emergencies! First unplug
the appliance in all emergency situations! Otherwise
one runs the risk of serious injury or loss of life!
• Place the food to be processed into the feed
tray e and position a container under the exit
opening to collect the processed food.
• First press the OFF button to check that the ap-
pliance is still switched off. Otherwise there is a
risk that the appliance could unintentionally start
when the plug is inserted into the power socket.
• Then put the plug into the socket.
• Press the button ON to start the appliance.
• Now push in the food into the feeding shaft with
the round stodger w – NEVER with one’s fingers,
forks, spoons or similar object. This could lead
to injury and also damage the appliance.
Important!:
Do not ever press so hard that the motor gets audibly
slower. This could overburden the machine under
pressure and damage it.
b) Processing meat
• Only use meat pieces which are not larger than
2 cm. Check that the meat does not have any
bones and or tendons.
IB_KH3462_RP30168_LB6.qxd 10.02.2009 15:35 Uhr Seite 7