Karcher K 395 M - Manual (Page 7)

7
Step 1
Install the Vario spray wand into the trigger
gun. Set the Vario spray wand to the low
pressure setting (–) by turning the wand
collar. The wand must be set in the low
pressure (–) position to apply detergents.
Step 2
Fill the detergent tank with Kärcher
detergent. Place the filter end of detergent
suction tube into the detergent tank
Step 3
Turn on the pressure washer.
Pull trigger to operate unit: Liquid detergent
is drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface
Caution
Never use:
• Bleach, Chlorine products and other
corrosive chemicals
• Liquids containing solvents
(i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
Working with detergents
Detergents can only be applied at low pressure (-).
The following Karcher detergents are
available:
-----------------------------------------------------------
One Gallon ready to use
• Vehicle Wash
• Degreaser
• All Purpose Cleaner • House Wash
• Deck Wash
-----------------------------------------------------------
Detergent Concentrate Tablets
(10 Pack; makes 1 1/4 gallon RTU product)
• All Purpose
• Degreaser
• Deck and patio • Windows and Siding
-----------------------------------------------------------
For best
results see
Cleaning
Tips on pages 9
& 10 for specific
information on how to
clean different
surfaces.
Always Use Karcher
Detergents for Best Results.
Karcher biodegradable detergents are“specially
formulated to protect the environment and your
pressure washer. Special formula won’t clog the
suction tube filter and will protect the internal
parts of the pressure washer for a longer life.
For Karcher Detergents, check your retailer or
call:
In USA call:
1-800-537-4129
or visit our website:
www.karcher-usa.com