Kenwood M1GC7 - Manual (Page 31)

English 1
FM.transmitter
Speaker.with.built-in.amplifier
Cable.with.stereo.mini-
plugs
Stereo.amplifier
Car.stereo
Connection of external components
The headphone jacks can be used to connect an external component such as a speaker
with built-in amplifier.
The USB connector can be used to connect an external component such as a stereo set
with USB capability.
Connecting to the headphones jack
. •.Prepare.an.optimum.audio.cable.(commercially.available).according.to.the.input.terminal.of.
the.connected.external.component.
. •.Noise.may.be.interfered.depending.the.installation.environment,.including.the.vehicle.model,.
devices.in.the.surroundings.and.the.antenna.positioning.
. •.Do.not.use.or.leave.the.Player.or.connected.component.in.an.automobile.compartment.with.
high.temperatures..Otherwise,.equipment.failure.may.result.
. •.For.the.operating.procedure.and.the.playable.files,.read.the.instruction.manual.for.the.
connected.stereo.set.
. •.Do.not.use.or.leave.the.Player.or.connected.component.in.an.automobile.compartment.with.
high.temperatures..Otherwise,.equipment.failure.may.result.
Connecting to the USB connector
USB-compatible.stereo
USB-compatible.car.stereo
USB.cable
1.Connect.the.USB.cable.
2.Set.the.USB.mode.to."Storage"..(page.10)
Appendix