Kohler Tellieur K-3106-F2 - Manual (Page 3)

86217Ć2Ć AA (C) 3 Kohler Co., Kohler, WI
3Ć
D
RAWER
U
NITS:
Determine whether you have a
horizontal or vertical drawer
unit. Check orientation of large
drawer to verify.
NOTE : When installing a
horizontal unit the large drawer
must be installed on the
leftĆhand side.
Determine the desired location
of the drawer unit.
Measure down 3Ć1/8" from
where the top edge of the drawer
unit will be located and 2Ć1/2" in
from where the right edge will
be located. Make a mark at this
point.
While holding the cleat with the
largest side facing away from the
wall, align the right hole in the
cleat with the mark on the wall.
Make sure cleat is level and
predrill holes into the wall to
align with the holes in the cleat.
Use a drill of adequate diameter
to accommodate fasteners (not
provided).
Secure cleat to wall with
fasteners (not provided).
Horizontal Drawer Unit
Cleat
2Ć1/2"
3Ć1/8"
Vertical Drawer
Unit
Cleat
2Ć1/2"
3Ć1/8"