Kompernass KH 2210 - Manual (Page 5)

- 3 -
bifinett KH 2210
Stainless steel electric water
kettle with thermostat KH 2210
Intended Use
• This appliance is not for commercial
or outdoor use.
• The electric water kettle is exclusively
suitable for heating water and may
not be used for heating other liquids.
Describtion of the appliance
ᕡ Chute
ᕢ Release button
ᕣ Indicator lamp
ᕤ On/Off switch
ᕥ Level indicator
ᕦ Temperature regulator
ᕧ Base station
º Kettle
Technical Data
Power supply: 230V / 50Hz
Output: 2200 Watt
Content: 1.7 Litres
Safety instructions
• Use the electric water kettle only
for the intended purpose and in
accordance with this user manual.
ƽ
Danger of electrical shock
• Make sure that the base with the
electrical connections does not come
into contact with water! Let the base
dry completely before using, should it
ever accidentally become wet.
• Make sure that the power cord never
becomes wet or damp during opera-
tion. Lay the cord such that it cannot
be pinched or otherwise damaged.
Allow only customer service to replace
damaged power cords or power
plugs, before using the appliance
again (see "Warranty & Service“).
• Always pull the plug out of the power
socket after use. Switching off the
device is not sufficient because the
device receives power as long as the
power plug is connected to the socket.
• Use the appliance only if the local
mains voltage complies with the rated
voltage of the appliance
(230 V for 50 Hz).
ƽ
Fire hazard! / Risk of injury!
• Always heat the water with a closed
lid, otherwise the automatic cut out
may not work. Boiling water can then
spray out over the edge.
• Hot vapours may leak out and the
electric water kettle may be very hot
while in operation. It is always best to
wear oven mitts when handling the
kettle.
• Make sure that the appliance is
placed on a stable and vertical base,
before you switch on the appliance.
Boiling water can cause an unstabile
kettle to fall over.
KH2210_IB_UK 11.09.2006 14:58 Uhr Seite 3