Kenwood IC400 - Manual (Page 9)

the outside
soleplate
● Don’t scratch the outside by ironing
anything hard eg zips.
● To remove minor remains of material
stuck to the soleplate, rub
lengthways with a soft, damp, non-
metallic cleaning pad.
casing
● Wipe with a damp cloth.
the inside
important
To extend the life of your steam
station and to avoid a build up of
scale, it is essential that you rinse
out the boiler after every 10 refills or
once a month. If you live in a hard
water area increase the frequency of
cleaning. Do not use chemical
descaling agents or vinegar as they
may damage your appliance.
● Before removing the boiler cap
always ensure the steam station has
been depressured (see page 3).
1 Fill the boiler with fresh water, rinse
then empty.
2 Always add 500ml water direct to
the boiler after cleaning to prevent
damaging the steam station.
service and customer
care
● If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
UK
If you need help with:
● using your steam station
● servicing or repairs (in or out of
guarantee)
ట
call Kenwood customer care on
023 9239 2333. Have your
model number ready – it’s on
the underside of your steam station.
spares and attachments
ట call 0870 2413653
other countries
● Contact the shop where you bought
your steam station.
guarantee (UK only)
If your steam station goes wrong
within one year from the date you
bought it, we will repair or replace it
free of charge provided:
● you have not misused, neglected or
damaged it;
● it has not been modified (unless by
Kenwood);
● it is not second-hand;
● it has not been used commercially;
● you have not fitted a plug incorrectly;
and
● you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
6