Selectable illumination, Brightness level adjustment, Dimmer – Kenwood KDC-9015 User Manual

Page 37: Switching graphic display, Black mask, Time setting for removing the faceplate

Advertising
background image

You can set the interval during which the open control panel
cannot reverse to be hidden. During the period you have set,
the faceplate can be removed from the faceplate bracket.

Display and setting:

"OFF WAIT" : 0sec / 3sec / 5sec / 10sec / 15sec / 20sec /

25sec (sec=sec.)

If you do not slide the faceplate lock switch during the period
which you have set, the unit’s power turns off after the control
panel is automatically hidden.

NOTE

Time setting for removing the faceplate

This function allows you to turn off the lower part of the
display if there is too much information in the display.

Display and setting:

"BLACK MASK ON" : The display will be shown in horizontally

divided mode. When this function is
enabled, the dual display mode is entered
and •••(CD-IN) indicator is displayed.
Clock alone is displayed in the lower part.

"BLACK MASK OFF" : The display will turn on by using the

whole part of the display.

This function cannot be set in the full-screen display and
horizontal division display.

NOTE

Black Mask

Display and setting:

"Graphic ON" : The graphic display works.
"Graphic OFF" : The graphic display does not work.

You can turn the movement of graphic display on and off.
The initial setting is ON.

Switching Graphic Display

You can dim the display.

The dimmer function is not available for units if the dimmer wire
is not connected.

Display and setting:

"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.

NOTE

Dimmer

You can adjust the brightness level of the unit separately when
your car's light switch has been turned on or off.

Display and setting:

"Bright 0" – "Bright 10"

The initial setting value while your car's light switch is turned on
is "5" , and while the light is turned off is "10" .

NOTE

Brightness level adjustment

You can switch the color of the button illumination between
green and red.

Display and setting:

"Color Green" : The color of the illumination is green.
"Color Red" : The color of the illumination is red.

Selectable Illumination

— 37 —

KDC-X915_U.S_r4 00.12.26 3:53 PM Page 37

Advertising