KORG MR-1 - Manual (Page 17)

17
2. Press the menu button, and in the menu list, use the P-dial to select and confirm
"REC LEVEL."
The recording level (REC LEVEL) setting screen will appear.
3. Make sure that the screen indicates Input Gain: (Manual).
If this is not shown, turn the P-dial to select the appropriate screen.
4. Use the P-dial to select and confirm InL Gain.
The selection icon will change from " " to " ", and the input jack L gain value will be high-
lighted.
5. Use the P-dial to select the gain value while you watch the level meter, and then press
the P-dial (or menu button). You have now finished setting the gain for input jack L.
The selection icon will change from " " to " ". Adjust the gain so that the level does not
exceed "0".
Push
Push Push
6. In the same way, use the P-dial to select and confirm the gain setting for input jack R.
7. When you've finished setting the recording levels, press the menu button to return to
the menu list screen, and then press the menu button once again to return to the level
meter screen.
Starting and stopping recording
Each time you record on the MR-1, a folder is created containing an audio file and a settings
file, collectively called a "project." The folder is named automatically (
→p.45).
You can edit this name after you've finished recording ( →p.24).
Operations on the MR-1 will handle the entire project folder just as if it were an audio file.
1. To start recording from record-ready mode, press the play/pause button.
The record LED will change from blinking slowly to blinking rapidly.
2. To pause recording, press the play/pause button (the record LED will blink slowly); to re-
sume recording, press the play/pause button once again (the record LED will blink rapidly).
A new project is not created if you pause during recording; the recording will still be a
single project.
3. When you're finished recording, press the stop button.
The record LED will go dark.
Pause and then
resume recording
Project 1 Project 1 Project 2
Start recording Start recording Stop recording
Stop and then
resume recording
Stop recording
MR1_Text1_E.p65 06.11.22, 0:00 PM 17